This video shows a brief clip of the projection mapping on the giant 3D moustache for the Moustachio Bashio 2013 at Sister Bar in Albuquerque, New Mexico. I used Millumin for the mapping and Resolume for the VJing.
For the final build I unfolded the full-size paper model and traced it on the foam core. I used push-pins to mark the vertices and then drew lines from point to point.
I used a 45° foam cutter and tried to get as close to the paper on the other side as I could. That way I would be able to make the folds easily with out too much resistance. I cut the outline with a regular Exacto after I made all the 45° cuts.
At this point I stopped taking photos because I was stressing to get the model finished. The Moustachio Bashio was that night. The folding worked pretty well with the 45s taken out. It could have been better though. I did meet some resistance which meant I had to be creative to get the final model stay together without deforming. Using spray adhesive and the brown wrapping paper that the foam came in, I bonded the open faces together.
This was harder than I expected, and because I was rushing turned out to be a little sloppier than I would have liked. The form was still pretty fragile and would not hold its shape well so I threaded a needle and sewed supporting strings into the back. This worked really well. I only needed 5 reinforcing tethers. At this point I was backstage at the venue and the first DJ was warming up so I just used white Gaff tape to attach the model to the back face. Luckily you couldn’t tell once it was hung. We had already done a placement test and calibrated the projector earlier that week. Once I finished the model I hung it right up with two chains that hooked into eyelets bolted into the plywood backing. Boy did being finished feel amazing. I came super close to having nothing to show for all my efforts.
This is from the placement test the week before. Our host Danger is obviously having fun.
After jumping through some hoops I finally got into the FabLab and got the back of the Stache cut out.
I printed out a full scale paper cut out for a keen $40 and went to work folding up the final mock up before I went to foam core.
I used Rhino 3D to generate a form from curves that I imported from Illustrator.
I then used Pepakura to unfold the model build a scale paper cut out version.
Our culture tends to sensationalize nudity and and combine it with sex to such an extent that it is often hard for us to think of it in any other way. We wanted to show that nudity does not have to be pornographic or about sex; it can be beautiful, light, and funny.
L’Aventure de Lolo was conceptualized as an independent short film for the 2012 Moustachio Bashio International Film Festival in Albuquerque, New Mexico. It was written and Directed by Chris Clavio, and executed by Clavio and DS Canning from idea to final-cut in just over a month. The film would not have been possible with our extremely talented and gracious cast and crew who came together at very short notice and for no pay to make the project happen.
Thank you to all of you who made this possible! We are all very proud of and happy with the final product. Please share your comments and share this with your friends. We would love to get the exposure 😉
You can watch the HD version without subtitles on Vimeo at http://vimeo.com/42476383